Terrazzo & Patterned

Start from tone rather than colour. Pair a light, low-movement worktop with strongly grained or dark doors, and use a worktop with more pattern when the doors are quiet and matt. The Design Styles guide groups finishes into four directions — Quiet Contemporary, Warm Classic, Urban Industrial and Natural Organic — with the worktop colours that sit naturally in each.

Stone inspired finishes are usually our first recommendation for hard-working kitchens. Their mid to dark tones, matt surfaces and fine speckle disguise crumbs, water marks and light scratching better than any other range, and they sit comfortably beside painted shaker doors, timber and handleless slab fronts alike.

Painted shaker doors want warmth and a little movement. Cream-veined marble inspired finishes and warm stone inspired surfaces both work well, usually in a 38mm profile with a bullnose or square edge to keep the proportions traditional. Cold blue-toned greys tend to fight painted timber, particularly in north-facing Irish kitchens.

Choose a quiet contemporary finish or a low-movement stone inspired surface in a slim profile with a square or mitred edge. With slab doors and integrated appliances the design relies on long uninterrupted horizontal lines, so the worktop should stay even and let cabinetry and lighting do the talking.

Wipe spills promptly with a soft cloth, warm water and mild detergent, then dry the surface — standing water around joints and the sink run is the main cause of long-term damage. Always use trivets for hot pans and a chopping board for cutting, and avoid abrasive creams, scouring pads, bleach and strong solvents, which permanently dull matt finishes. Test any new cleaner on an offcut first.

Yes — and considerably more practical than natural marble, which is porous and etches on contact with lemon, wine and vinegar. A marble inspired worktop gives you the veining and brightness with a sealed, non-porous working surface. Because pale surfaces show crumbs and coffee rings more readily than mid-tones, choose a finish with some vein movement if the kitchen is busy, and keep joints away from the sink.

No. A wood effect worktop gives you grain, knots and tonal warmth without the sanding, oiling and water-sensitivity a solid timber top demands — normal wiping is all it needs. The one thing to plan carefully is grain direction: set runs out so the grain travels along the length of the worktop and aligns at joints and mitred corners.

Mid-tone, matt or textured surfaces with some pattern — stone inspired speckle, terrazzo aggregate and wood grain in particular. They hide fingerprints, dust and light scratching best. The highest-maintenance combination is a very dark, plain, high-gloss surface, which looks superb but shows every mark.

Available sheet sizes, thicknesses, edge profiles and matching upstands or splashbacks vary by range and finish. Contact the trade team with the finishes you are considering and we will confirm current availability, lead times and any minimum order requirements.

Most finishes in the collection can be supplied with coordinating upstands, splashbacks and panels so a run reads as one continuous surface. Because matching components are produced range by range, confirm with our team early in the specification so everything is drawn from the same batch wherever possible.

Compact laminate is a solid, through-coloured panel with no separate core, typically around 12mm thick. Because it needs no edge banding it gives the slimmest, sharpest edge line available, which suits handleless contemporary kitchens, and it is highly water resistant, making it popular for utility rooms and island runs. It sits at a higher specification tier than standard postformed worktops, so price it early if the slim profile is important to you.

Around 38mm is the traditional standard and suits shaker and classic kitchens. Slimline surfaces of roughly 12–22mm read distinctly contemporary and pair well with handleless doors and integrated appliances. A mitred or wrapped edge lets you build a thicker apparent depth on a slim core, which is how the chunky island profiles in contemporary kitchens are usually achieved.

A postformed bullnose is the softest and most traditional; a square or pencil-round edge is the transitional default; a mitred or wrapped edge gives a contemporary waterfall detail on island ends. The profile changes the character of a kitchen as much as the colour does, and it affects cost, so decide it alongside the finish rather than afterwards.

Most finishes can be supplied with coordinating upstands, full-height splashbacks and end panels. A full-height splashback behind the hob or sink removes grout lines entirely, wipes down far more easily than tile and is the strongest way to show off a marble inspired or terrazzo finish. Confirm the complete component list with our team at the same time as the worktop so everything comes from matched batch stock.

Every finish is photographed as a full sheet so you can judge scale, movement and pattern repeat rather than a small crop. Screen calibration, ambient light and batch variation still change how a surface reads in a real kitchen, so we always recommend viewing a physical sample before you commit to a finish. Our team can arrange samples for any colour in the collection.

The categories describe how a surface looks, not what it is made from. Grouping finishes by appearance — marble inspired, stone inspired, contemporary, terrazzo and patterned, or wood effect — lets you compare like with like across different product ranges, and avoids implying a material composition that a particular sheet may not have. Our team will confirm the exact substrate, thickness and performance characteristics for any finish you shortlist.

Surfaces in this collection are supplied as manufactured worktop sheets rather than quarried slabs, which is why the ranges are described by appearance — marble inspired, stone inspired, wood effect and so on — rather than by material claim. Depending on the range, that can mean a laminate-faced core, a compact laminate panel or a solid surface product, each with different thicknesses, edge options and performance. Tell our trade team which finishes you like and they will confirm exactly what each one is and how it performs.

Note the finish names you are interested in and send them to the Light Hardware Supplies trade team using the enquiry form on the main website. Include the approximate linear metres, any island or breakfast bar, and your preferred edge detail, and we will come back with pricing, availability and specification guidance.