Manufacturer
Mica Post Form is organised around two families that differ mainly in how the front edge is formed. Post Form worktops carry the familiar rolled bullnose edge, where the laminate curves continuously over the front with no visible join and an incorporated front edge seal. Leading Edge worktops use a square profile finished on all four sides with a bonded edge and PU adhesive, giving a crisper, more contemporary line and stronger protection against water ingress. Both are 38mm laminate surfaces with matching splashbacks, upstands and plinths available, and both are best paired with inset sinks rather than undermount or Belfast bowls.
Thicknesses, sheet lengths and edge treatments follow the manufacturer’s current published specification. Confirm availability with our trade team before ordering. For general guidance on choosing between profiles and thicknesses, see the worktop buying guide.
Range positioning
The two Mica Post families share the same laminate surfaces. What separates them is the front edge — and that decides how the finished worktop reads in the room.
Rolled bullnose — the laminate curves continuously over the front edge with no visible join.
Square profile, edged on all four sides with a bonded edge and PU adhesive.
The finishes
39 Mica Post finishes sit inside the studio’s five appearance ranges. Each range page shows every manufacturer side by side so you can compare the look before the supplier.
Continue in the Advice Centre
